85 DB Wireless Interconnected Smoke Alarm Smoke Detector With ABS Fireproof Materials
Products Description
Accurate response: The use of enhanced photoelectric sensors can quickly and accurately respond to all fire situations, with one alarm; provide smoke or fire warnings as early as possible, while minimizing false alarms
Self-activation: When it is installed in the mounting bracket, this alarm will be automatically activated; the TEST/SILENCE button allows you to temporarily silence the annoying alarm, unless the device is in alarm mode, otherwise the silent mode will not be activated
Interlinked devices function: Radio-interlinked smoke detectors are interlinked through radio frequency signals. If one smoke alarm detects fire, all alarms go off. In the case of the battery operated radio-interlinked smoke alarms, no wiring is required at all
Auto-check function: continuous self-checking, reminding the alarm if there is a fault or the battery is low; the 85 dB alarm and LED indicator will remind you of the working status of the alarm
Convenient installation: using the included mounting brackets, screws and anchors, it can be easily installed on any wall or ceiling; wireless connection installation
Quality Assurance: Pass TUV certification and meet CE safety standards; 2-year warranty and lifetime customer support
Attention
1. Please test it once a month to ensure that the smoke alarm works properly
2. Please clean the dust on the alarm every 6 months to prevent false alarming caused by clogged smoke alarms
Technological Parameters
| Product name | 85 DB Wireless Interconnected Smoke Alarm Smoke Detector With ABS Fireproof Materials |
| Material | ABS Fireproof Materials |
| Operation Current | <30uA (standby); <70mA (alarm) |
| Alarm Volume | >85 dB(A) at 3 meters |
| Colour | Pure White |
| Battery Package | Alkaline (LR6,MN1500) or Carbon Zinc battery (R6P) |
| Temperature | 0℃ ~40℃ |
| Silence Time | approx. 10 minutes |
| Battery | Alkaline zinc battery |
| Size | 120 * 31.5 mm |
| Working distance | Up to 100m (Outdoor open) |
| Certificate | CE TUV |
Feature
85 decibel alarm: 85 decibel alarm noise level at 3 meters to remind your whole family and help you prepare for an emergency.
3-year battery life: 3-year alkaline zinc battery(Replaceable battery), no need to replace the battery frequently or worry about power failure, saving time and effort.
Interlinked devices: Up to 30 device interconnections per group.Radio-interlinked smoke detectors are interlinked through radio frequency signals. If one smoke alarm detects fire, all alarms go off.
Silent mode: During the unit alarm period, you can press the test button, and the unit will pause the alarm for about 10 minutes. The red LED light flashes once every 8 seconds, indicating that the smoke alarm has entered silent mode.
LED indicator: only red, the indicator responds differently in different states
- Normal status: Red LED Flashes once every 60 seconds.
- Test status: Red LED flashes once every second.
- Hush/Silence mode: Red LED flashes once every 8 seconds.
- Low Battery status: Red LED flashes once every 60 seconds and 1 beep every 60 seconds.
- Fault status: the alarm will deliver beeps every 40 seconds.
Where to install
1. At first you should install an alarm in the bedroom and walkway. If there are several bedrooms in the house, please install an alarm in every bedroom.
2. Install an alarm above the stairway and on every floor of the house.
3. Smoke, heat and burning things will spread horizontally after rising to the ceiling, so install the alarm in middle of the ceiling.
4. If the alarm can not be installed in the middle of the ceiling, in stall it keeping 300mm away from the corners . .
5. If the alarm is installed in the wall, it should keep 100mm away from the ceiling.
6. If the length of the room or the hall is beyond 30 foot, you need to install several alarms there.
7. When the wall or ceiling is slanting, the alarm needs to be installed minimum 500mm away from the highest wall or ceiling point in the room.
Packing List
1 × Photoelectric smoke alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual
FAQ
Q:How about the quality of Smoke Alarm?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.
Q: Can i have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.
Q: Do you offer OEM service, like make our own package and logo printing?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.
Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.
Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.
Product Tags:
|
|
85 DB Wireless Interconnected Smoke Alarm Smoke Detector With ABS CMaterials Images
|
